Bearing

Help · Use Bearing

Set up a Facebook ad that Bearing can read

Step by step: a goal first, one link per ad made in Bearing, the cost typed in, then which ad leads to your goal, and how long to wait before concluding.

On Facebook it is hard to tell which ad works: Meta counts the times an ad was shown and the clicks, not what people then do on your site. Bearing counts what happens during the visits that come through your ads' links: a sign-up, a purchase. This guide sets up one campaign so that Bearing can read it, ad by ad. Do it before you publish the ad: about fifteen minutes.

Nobody is followed: Bearing reads the links people arrive through, not the people. That is why some things stay out of its sight; they are listed at the end.

1. Say what your site is for

Without a goal, Bearing can only count visits, and an ad that brings many visits and no sale would look like the best one. A goal is what you expect from a visitor: a purchase, a sign-up, a contact request.

  1. Open your site's Statistics page. While the site has no goal, the first place invites you: What is your site for?
  2. Answer What you expect from a visitor, then How do we know it happened?: an event your site already sends, a page shown afterwards (a thank-you page, for example), or a button clicked.
  3. Click Save this goal.

When the goal brings you money later or elsewhere (a click to Amazon, a sign-up, a booking), give it an Estimated value: in the Events tab, under the goal's Install and settings. Bearing can then estimate what the ad brought, even with no payment to read. See Goals and conversions.

A goal whose event has never arrived shows in your To handle list. Check its installation before you spend anything: otherwise the ad will show visits, and nothing else.

2. One link per ad, made in Bearing

An ad leads to an address of your site. Bearing reads the tags at the end of that address (the part that begins with utm_, for example utm_source=facebook): they say where the visit comes from, which campaign and which ad. Let Bearing write them.

  1. Open your site's Markers tab, section Make a campaign link.
  2. The campaign's name, in your words: a name you will recognise in three months, “Paris workshop, autumn”.
  3. Where the link will be placed: Facebook. Tick It is a paid ad.
  4. The page the link leads to: leave it empty for your home page, or type the page of your offer. It must be a page of your site: Bearing would not see the visits of a link that leads elsewhere.
  5. The ad's name: a short name for this ad, “Video” or “Cover image”.
  6. Click Make the link, then Copy, and keep it next to the ad it belongs to.
  7. For the next ad, keep exactly the same campaign name and change only the ad's name. One link per ad.
  • Why not type the tags yourself: one typo in a campaign's name makes a second campaign, and the visits are split between the two. Given the same campaign name, Bearing writes the same tags every time. And a campaign made here is announced: it becomes a marker at its first visit, with nothing to sort.
  • A link without tags arrives as plain Facebook, mixed with the visits from your posts and your Page: no campaign, no ad, no cost can be set against them.
  • Meta also shows ads on Instagram: the link says Facebook, so Bearing files those visits under Facebook too, in the same campaign.

Your AI can make the links: “Make me the links of the three ads of my Paris workshop campaign: a video, an image, a story.”

3. In Meta's Ads Manager

Meta's screens change often, and this guide does not describe them. Four things matter for what Bearing will see:

  • The destination is Bearing's link, whole. Paste it as it is, tags included, as the website address of the ad it was made for.
  • Meta may copy the tags into its own tracking section. Leave them as they are.
  • Bearing needs nothing from Meta: no Meta pixel, no connection. The line already on your site does the counting.
  • Link clicks or landing-page views: what Meta aims for is your choice. Bearing counts the visits either way.

To check a link before publishing, open it in a browser left out of the count: you see the page, and Bearing counts no visit.

4. The first visits

Until its first visit, the campaign waits in the Markers tab under Campaigns waiting for their first visit. At its first visit it becomes a marker by itself, on that day, under the name you gave it: nothing to sort. Bearing looks once a day, so the marker can appear the next morning.

The marker shows on your curve on the Statistics page and in Your markers. Open the marker leads to the campaign's own page: the next steps all happen there.

5. Type what it costs

Bearing reads nothing from Meta: the cost is the one you give.

  1. On the campaign's page, click Say what it cost.
  2. Type the amount and choose the Currency.
  3. Rhythm: Per day for a daily budget, or In all for the total spent to date, as your ad account shows it.
  4. With a rate, fill in Stopped on when the campaign stops.
  5. Click Save the cost.

A rate gives an Estimated cost, counted from the campaign's first visit: a daily budget is a ceiling, and Meta may have spent a little less. When the campaign ends, replace it with the real total, typed In all. A total typed while the campaign runs needs updating until it stops.

6. Read the result

On the campaign's page, What the campaign brought gives, since its first visit:

  • the visits that came through its links, and what one visit cost;
  • how many of those visits reached each of your goals, and what one conversion cost;
  • the revenue tied to the campaign, when Bearing reads your payments (see Revenue);
  • the Result: revenue minus cost. With no payment tied to the campaign in the cost's currency, there is no result: Bearing shows no loss it cannot be sure of.

When your goal has an estimated value, an Estimated revenue (conversions times that value) and an Estimated result appear, always marked Estimated. They are your estimate: never added to real revenue.

Under 30 visits, Bearing says the numbers do not allow a conclusion yet.

7. Compare the ads

Under the result, the campaign's page shows it ad by ad: each ad's visits, the goal reached most and its rate. A visit counts for the ad named in the link it came through; visits from a link with no ad's name are under No ad named.

  • Under 30 visits, an ad has no rate: it says “too few visits to conclude”. A rate on a handful of visits can be chance.
  • Look at the rate, not the visits alone: the ad that brings the most visits is not the best one if they lead nowhere.
  • The cost is the whole campaign's: Bearing does not know what each ad spent. To compare what each ad costs, make one campaign per ad, each with its own cost.

8. Week after week

Two campaigns or more from the same place (Facebook, paid ad) form a series by themselves, under Series in the Markers tab. Its page puts the campaigns side by side (visits, your goal and its rate, the cost, the cost of one conversion, the revenue), then the weeks from Monday to Sunday.

Week by week it shows the visits, and the cost of one conversion when every cost was given per day, per month or per year (a total cannot be cut into weeks: it then shows each week's conversions). The last two complete weeks are compared with the two before, when each side has 30 visits.

Every Monday, the weekly report also tells you what led to your goal the week before.

9. What Bearing cannot see

  • A purchase on a later visit. Someone sees the ad on Monday, comes back on their own on Thursday and buys: Thursday's visit counts as Direct. Nobody is followed, so nothing links the two visits. A campaign may have brought more than its result says; the comparison of the days before and after its marker catches part of it.
  • A sale made elsewhere: in a shop, on Amazon, by phone. Bearing does not see it. An estimated value on your goal stands in for it.
  • Meta's numbers will not equal Bearing's visits. A click is not always a visit: someone clicks and leaves before your page has loaded, or their browser blocks measuring tools. And Meta counts by its own rules. Compare your ads with each other in Bearing, rather than Meta's numbers with Bearing's.

10. How long to wait before concluding

There is no number of days that fits everyone, and Bearing does not invent one. Its rule: a rate is shown from 30 visits; under that, it is too early. With a small daily budget, each ad can take weeks to get there, and the more ads share the budget, the longer it takes. So run few ads at once, leave them alone, and decide once each one has its visits.

Then keep the ad that leads to your goal, replace the weakest with a new one (a new link, the same campaign's name, a new ad's name), and go again. Bearing shows what happened, not why: why an ad worked is yours to judge. Your AI can help: “Look at my Facebook campaign in Bearing: which ad leads to my goal, and is it too early to say?”